Dell Precision WorkStation 210 Скачать руководство пользователя страница 43

Страница: 43 / 247

Using the Software Support Utilities 2-3

The

Auto Power On

utility (which runs under the MS-DOS

operating system

only) reports what caused the system to power on, such as the power switch or a

call from the Auto Power On utility itself. This utility also enables you to create a

batch file to carry out a series of commands when your system is powered on by

the Auto Power On feature or by the power switch.

5HLQVWDOOLQJWKH'HOO6\VWHP8WLOLWLHVDQG6HUYLFHVIRU

:LQGRZVRU:LQGRZV

The system utilities and services are already installed and operative on your hard-disk

drive. If, for any reason, you need to reinstall the utilities and services, perform the

following steps:

If you have not already done so, use the Program Diskette Maker to make a

diskette copy of the Dell system utilities

diskette image on your hard-disk drive.

The Program Diskette Maker is available through the

Dell Accessories

folder. For

more information, refer to the online help provided in the Program Diskette

Maker.

2. Start Windows 95 or Windows 98. If you are already running Windows 95 or

Windows 98, close any open documents or application programs.

3. With the backup diskette in drive A, run the

setup.exe

program from the diskette.

4. Follow the instructions on the screen to install the Dell utilities and services.

The Asset Tag utility and Auto Power On utility (if installed) are located in the

c:\dellutil

directory.

5HLQVWDOOLQJWKH'HOO6\VWHP8WLOLWLHVDQG6HUYLFHVIRU

:LQGRZV17

The system utilities and services are already installed and operative on your hard-disk

drive. If, for any reason, you need to reinstall the utilities and services, perform the

following steps:

If you have not already done so, use the Program Diskette Maker to make a

diskette copy of the Dell system utilities

diskette image on your hard-disk drive.

The Program Diskette Maker is available through the

Dell Accessories

folder. For

more information, refer to the online help provided in the Program Diskette

Maker.

2. Start Windows NT and log in as Administrator or as a user with administrative

privileges. If you are already running Windows NT, close any open documents or

application programs.

3. With the backup diskette in drive A, run the

setup.exe

program from the diskette.

4. Follow the instructions on the screen to install the Dell utilities and/or services.

When the installation is finished, restart your system to activate the services.

Содержание Precision WorkStation 210
























































































































































































































































Результаты поиска

Содержание Precision WorkStation 210

Отзывы:

Похожие инструкции для Precision WorkStation 210

Бренды по названию

Популярные бренды

Dell Precision WorkStation 210, Руководство пользователя

Результаты поиска

Содержание Precision WorkStation 210

Отзывы:

Похожие инструкции для Precision WorkStation 210

Бренды по названию

Популярные бренды