Dell Precision WorkStation 210, Руководство пользователя

Страница: 104 / 247

5-12 Dell Precision WorkStation 210 Mini Tower Systems User’s Guide
8. In the Select Network Adapter window, click 3Com Fast Etherlink XL
10/100Mb TX Ethernet NIC (3C905B-TX) , and then click OK .
A notification pop-up window tells you that you have installed a Plug and Play
adapter and that you must turn off your system and install the adapter. Your NIC
is already integrated on the system board. Do not turn off the system at this time.
9. Click OK in the notification pop-up window.
10. When prompted, insert the NIC driver diskette into drive A, and click OK .
11. At the Copying Files window, click the down arrow and click a:\ . Then click OK .
12. When prompted to restart your computer, remove the NIC driver diskette from
drive A and click Yes .
13. When the Enter Network Password dialog box appears, enter the user name
and password you want to use for network access.
14. When prompted to retain your previous network settings, click Yes .
15. At the Add New Hardware Wizard window, click Next .
16. When prompted to search for a driver, click Next .
17. When prompted for the location of the driver, click the Specify a Location
check box and verify that
c:\windows\options\cabs
is the search location.
Then click Next .
18. When a message appears indicating that Windows 98 has found the best driver
for the device, click Next .
19. When prompted, insert the NIC driver diskette into drive A and click OK .
20. At the Copying Files window, click the down arrow and click a:\ . Then click OK .
21. When a message confirms that Windows has finished installing the software,
click Finish .
22. When prompted to restart your computer, remove the NIC driver diskette 2 from
drive A and click Yes .
23. When the Enter Network Password dialog box appears, enter the user name
and password you want to use for network access.
24. From the desktop, right-click the Network Neighborhood icon and click
Properties . Then configure the NIC properties as instructed by your network
administrator.
NOTE: The IPX/SPX-compatible protocol is not loaded by default. It must be
loaded manually.
25. When prompted to restart the system, click Yes .