Dell Precision WorkStation 210, Руководство пользователя

Страница: 44 / 247

2-4 Dell Precision WorkStation 210 Mini Tower Systems User’s Guide
5. Verify that the utilities and/or service(s) are installed and running.
Double-click the Services icon in the Control Panel . AutoShutdown and
ThermalShutdown should be listed with the status of Started .
The Asset Tag utility and Auto Power On utility (if installed) are located in the
c:\dellutil directory.
5HPRYLQJD6HUYLFH
To remove a service, perform the following steps:
1. Insert the backup diskette in drive A.
2. Run remove.exe from the diskette.
3. Select the service(s) you want to remove and click Next .
$VVHW7DJ8WLOLW\
The Asset Tag utility allows you to enter an asset tag number for the computer. The
default System Setup screens (see Figure 3-1) do not show the asset tag number
unless you enter one using this utility.
NOTE: The Asset Tag utility does not function correctly under Windows NT,
Windows 95, or Windows 98. However, you may be able to run the utility in
Windows NT by booting from a DOS diskette or diagnostics diskette, exiting to the
DOS prompt, and then entering the
asset
command on the DOS command line.
You can use the Asset Tag utility to enter an asset tag number that you or your
company assign to the computer.
You can also use the Asset Tag utility to enter an owner tag that appears in the
system sign-on screen.
Use the asset command from an MS-DOS prompt. To view existing asset tag and
service tag numbers, type
asset
and press <Enter>. (You can also view the asset
tag number using the System Setup program described in Chapter 3.)
The Asset Tag utility is located in the c:\dellutil directory.
$VVLJQLQJDQG'HOHWLQJDQ$VVHW7DJ1XPEHU
An asset tag number can have up to ten characters; any combination of characters
excluding spaces is valid. To assign or change an asset tag number, type
asset
and a
space followed by the new number; then press <Enter>. For example, type the
following command line and press <Enter>:
asset 1234$ABCD&
When prompted to verify the asset tag number, type
y
and press <Enter>. The system
then displays the new or modified asset tag number and the service tag number.