background image

Script Commands

243

Syntax

show virtualDiskCopy (allVirtualDisks | 
source ["

sourceName

"] | 

target ["

targetName

"])

Parameters

Show Virtual Disk Copy Source Candidates

This command returns information about the candidate virtual disks that you 

can use as the source for a virtual disk copy operation.

Syntax

show virtualDiskCopy sourceCandidates

Parameters

None.

Additional Information

This command returns virtual disk copy source information as shown in this 

example.

Virtual Disk Name: finance
Capacity: 4.0 GB
Disk Group: 1

Parameter

Description

allVirtualDisks

Returns information about virtual disk copy operations for all 

virtual disk copy pairs.

source

Name of the source virtual disk about which to retrieve 

information. You must put quotation marks (" ") and 

brackets ([ ]) around the source virtual disk name. The 

source virtual disk name and quotation marks must be inside 

the brackets.

target

Name of the target virtual disk about which to retrieve 

information. You must put quotation marks (" ") and 

brackets ([ ]) around the target virtual disk name. The target 

virtual disk name and quotation marks must be inside the 

brackets.

book.book  Page 243  Friday, March 4, 2011  10:45 AM

Содержание PowerVault MD3200 Series
























































































































































































































































































Отзывы: