Dell PowerVault MD3200 Series Скачать руководство пользователя страница 172

Страница: 172 / 279

172

Script Commands

Additional Information

NOTE:

You can use any combination of alphanumeric characters, hyphens, and

underscores for the names. Command names can have a maximum of 30

characters. If you exceed the maximum character limit, replace square brackets

([ ]) with angle brackets (< >) to overcome this limitation.

You can recreate a single Snapshot virtual disk or multiple Snapshot virtual

disks with optional parameters:

• If you specify one or more of the optional parameters, the re-create

operation processes each snapshot virtual disk separately.

• If you try to use the same user label for more than one virtual disk, the

command fails.

• If you do not set the warningThresholdPercent parameter or the

repositoryFullPolicy parameter, values that you previously set are used.

You can recreate multiple Snapshot virtual disks without optional parameters:

• If you list multiple snapshot virtual disks to be re-created but do not

specify any of the optional parameters, the re-create operation processes

the snapshot virtual disks as a batch process.

• Validation checks for the necessary snapshot-restarted preconditions are

performed before restarting any snapshot. If any of the listed snapshot

virtual disks fail the validation, the entire command fails and the snapshot

virtual disks are not re-created. If the validation is successful for all of the

snapshot virtual disks in the list, but one or more of the snapshots in the

list fails to restart, the entire command fails and none of the snapshots are

re-created.

• During snapshot re-creation, all affected virtual disks (snapshots, base, and

repository) are appropriately quiesced and I/O operations are resumed to all

affected virtual disks after all snapshots have been successfully re-created.

NOTE:

If the

warningThresholdPercent

parameter or the

repositoryFullPolicy

parameter is not specified, the previously set values are used. If you use the

optional parameters, the re-create Snapshot processes each snapshot virtual disk

separately. If the same userLabel (name) is specified for more than one virtual disk,

the command fails. If no optional parameters are specified, the re-create Snapshot

processes the specified snapshot virtual disks as a batch, provided a validation

check of all of the virtual disks runs successfully. If successful, the snapshots start

the re-creation process and all of the affected virtual disks (snapshot, source, and

repository) are quiesced until the process is complete.

book.book Page 172 Friday, March 4, 2011 10:45 AM

Содержание PowerVault MD3200 Series
























































































































































































































































































Результаты поиска

Содержание PowerVault MD3200 Series

Отзывы:

Похожие инструкции для PowerVault MD3200 Series

Бренды по названию

Популярные бренды

Dell PowerVault MD3200 Series, Руководство CLI

Результаты поиска

Содержание PowerVault MD3200 Series

Отзывы:

Похожие инструкции для PowerVault MD3200 Series

Бренды по названию

Популярные бренды