Dell PowerVault MD3200 Series Скачать руководство пользователя страница 224

Страница: 224 / 279

224

Script Commands

Show Current iSCSI Sessions

This command displays information about an iSCSI session for either an

iSCSI initiator or iSCSI target.

Syntax

When running from the command line, use:

show iscsiInitiator [\“

initiatorName

\”]

iscsiSessions

show iscsiTarget [\“

targetName

\”] iscsiSessions

When running from a script file, use:

show iscsiInitiator [“

initiatorName

”]

iscsiSessions

show iscsiTarget [“

targetName

”] iscsiSessions

Parameters

NOTE:

This command can be entered without defining any arguments, i.e.

show iscsiSessions

When the command is entered without arguments, the information displayed is for

all active iSCSI sessions. To limit the information displayed, enter a specific iSCSI

initiator or a specific iSCSI target. The command then displays only information

about that particular iSCSI initiator or iSCSI target session.

Parameter

Description

initiatorName

The name of the iSCSI initiator for which session information is

desired. Enclose the iSCSI initiator name in double quotation

marks (“ ”). The name and quotation marks must also be

enclosed in either square brackets ([ ]) or angle brackets (< >). If

the name is longer than 30 characters, the angle brackets must be

used.

targetName

The name of the iSCSI target for which session information is

desired. Enclose the iSCSI target name in double quotation

marks (“ ”). The name and quotation marks must also be

enclosed in either square brackets ([ ]) or angle brackets (< >). If

the name is longer than 30 characters, the angle brackets must be

used.

book.book Page 224 Friday, March 4, 2011 10:45 AM

Содержание PowerVault MD3200 Series
























































































































































































































































































Результаты поиска

Содержание PowerVault MD3200 Series

Отзывы:

Dell PowerVault MD3200 Series, Руководство CLI, Страница: 224 / 279

Результаты поиска

Содержание PowerVault MD3200 Series

Отзывы: