Dell PowerEdge R910 Скачать руководство пользователя страница 71

Страница: 71 / 210

Using the System Setup Program and UEFI Boot Manager

PCI IRQ Assignments Screen

Embedded Gb NIC

(NIC1 default:

Enabled

with PXE

;

Other NICs:

Enabled

)

Enables or disables the integrated NIC. Options are

Enabled

Enabled with PXE

Enabled with iSCSI Boot

and

Disabled

. PXE support allows the system to boot

from the network.

MAC Address

Displays the MAC address for the integrated 10/100/1000
NIC.

Capability Detected

Displays the NIC features of the LOM NIC hardware key.

NOTE:

Some LOM features may require the installation of

an additional driver.

OS Watchdog Timer
(

Disabled

default)

Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding.
When

Enabled

, the operating system is allowed to

initialize the timer. When

Disabled

, the timer is not

initialized.

NOTE:

This feature is usable only with operating systems

that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b
specification.

I/OAT DMA Engine
(

Disabled

default)

Enables or disables the I/O Acceleration Technology
feature.

Embedded Video
Controller
(

Enabled

default)

Enables or disables BIOS support for the integrated video
controller.

NOTE:

This field can be disabled only if an add-in video

card is present. If this field is disabled, remote access
features such as virtual KVM are not available.

SR-IOV Global Enable
(

Enabled

default)

Enables or disables the BIOS configuration of Single
Root I/O Virtualization (SR-IOV) devices.

Option

Description

PCIe device

Use the <+> and <-> keys to manually select an IRQ
for a given device, or select

Default

to allow the BIOS to

select an IRQ value at system startup.

Option

Description

book.book Page 71 Wednesday, January 20, 2010 10:20 AM

Содержание PowerEdge R910



















































































































































































































Результаты поиска

Содержание PowerEdge R910

Отзывы:

Dell PowerEdge R910, Руководство владельца оборудования, Страница: 71 / 210

Результаты поиска

Содержание PowerEdge R910

Отзывы: