manualshive.com logo in svg

Dell PowerEdge R910, Руководство владельца оборудования, Страница: 42 / 210

Поделиться
Скачать
Dell PowerEdge R910 Скачать руководство пользователя страница 42

42

About Your System

Alert! iDRAC6 not 

responding. 

Power required 

may exceed PSU 

wattage.

Alert! 

Continuing 

system boot 

accepts the risk 

that system may 

power down 

without warning.

The iDRAC6 is hung.

The iDRAC6 was remotely 
reset while system was 
booting

After AC recovery, the 
iDRAC6 takes longer than 
normal to boot.

Remove AC power to the 
system for 10 seconds and 
restart the system.

Alert! Node 

Interleaving 

disabled! Memory 

configuration 

does not support 

Node 

Interleaving. 

The memory configuration 
does not support node 
interleaving, or the 
configuration has changed 
(for example, a memory 
module has failed) so that 
node interleaving cannot be 
supported.

 

The system will 

run but without node 
interleaving.

Ensure that the memory 
modules are installed in a 
configuration that supports 
node interleaving. Check 
other system messages for 
additional information for 
possible causes. For memory 
configuration information, 
see "General Memory 
Module Installation 
Guidelines" on page 92. If 
the problem persists, see 
"Troubleshooting System 
Memory" on page 181.

Message

Causes

Corrective Actions

book.book  Page 42  Wednesday, January 20, 2010  10:20 AM

Содержание PowerEdge R910



















































































































































































































Отзывы:

Нет отзывов