background image

  

  

ENERGY STAR

® 

Compliance 

Certain configurations of Dell computer systems comply with the requirements set forth by the Environmental Protection Agency (EPA) for energy-efficient 
computers. If the front panel of your computer bears the 

ENERGY STAR

® 

Emblem

, your original configuration complies with these requirements and all ENERGY 

STAR

® 

power management features of the computer are enabled. 

ENERGY STAR

® 

Emblem  

  

The EPA's ENERGY STAR

® 

Computers program is a joint effort between the EPA and computer manufacturers to reduce air pollution by promoting energy-

efficient computer products. The EPA estimates that use of ENERGY STAR

® 

computer products can save computer users up to two billion dollars annually in 

electricity costs. In turn, this reduction in electricity usage can reduce emissions of carbon dioxide, the gas primarily responsible for the greenhouse effect, and 
sulfur dioxide and nitrogen oxides, which are the two primary causes of acid rain. 

Computer users can also help to reduce electricity usage and its side effects by turning off their computer systems when they are not in use for extended 
periods of time

particularly at night and on weekends. 

NOTE: 

As an ENERGY STAR

® 

Partner, Dell Computer Corporation has determined that this product meets the ENERGY STAR

® 

guidelines for energy 

efficiency. 

NOTE: 

Any Dell computer bearing the ENERGY STAR

® 

Emblem is certified to comply with EPA ENERGY STAR

® 

requirements as configured when shipped 

by Dell. Any changes you make to this configuration (such as installing additional expansion cards or drives) may increase the system's power 
consumption beyond the limits set by the EPA's ENERGY STAR

® 

Computers program. 

Содержание OptiPlex GX400

























































































Отзывы: