Dell OptiPlex GX400 Скачать руководство пользователя страница 24

Страница: 24 / 88

Installing the Hard-Drive Bracket in the Chassis

Connect the interface cable for the drive (see "

Attaching Hard Drive Cables in the Chassis

").

If you are installing an EIDE device, ensure that the IDE interface cable is properly connected to the EIDE connector on the system board. For

more information, see "

EIDE Device Installation Guidelines

If you are installing a SCSI device, ensure that the SCSI interface cable is properly connected to the interface connector on the SCSI controller

board. For more information, see "

SCSI Device Installation Guidelines

10.

Connect a DC power cable to the power input connector on the back of the drive (see the following figure).

Attaching Hard Drive Cables in the Chassis

11.

Ensure that all cables are firmly connected. Fold cables out of the way to provide airflow for the fan and cooling vents.

12.

Ensure that the control panel cable is firmly connected to the system board.

The control panel contains the hard-drive activity indicator. To locate the control panel system board connector, see "

System Board Components

13.

Replace the front panel.

14.

Replace the computer cover, reconnect the computer and peripherals to their electrical outlets, and turn them on.

ALERT! Cover was previously removed.

NOTICE:

To avoid possible damage, you must match the colored strip on the interface cable with pin 1 on both the drive and system board connectors.

NOTE:

If enabled, the

Chassis Intrusion

option will cause the following message to be displayed at the next system start-up:

Содержание OptiPlex GX400

























































































Результаты поиска

Содержание OptiPlex GX400

Отзывы:

Похожие инструкции для OptiPlex GX400

Бренды по названию

Популярные бренды

Dell OptiPlex GX400, Руководство пользователя

Результаты поиска

Содержание OptiPlex GX400

Отзывы:

Похожие инструкции для OptiPlex GX400

Бренды по названию

Популярные бренды