Dell OptiPlex GX400 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 88

background image

1.

Enter

system setup

and make sure the problem drive is configured correctly. Make any necessary changes, and reboot the system.

Is the drive operating properly?

Yes

. The problem is resolved.

No

. Go to

step 2

.

2.

Test the hard drive by using one of the following methods:

l

Test the hard drive by using one of the following methods:

¡

For Windows XP and Windows 2000, run the chkdsk utility by clicking the

Start

button, selecting

Run

, and then typing

cmd

in the dialog box. At the

C:

prompt, type

chkdsk

and press <Enter>.

This utility creates and displays a status report, and lists and corrects errors on the disk.

¡

For Windows NT, run the error-checking utility by double-clicking

My Computer

and selecting the hard drive that you want to check. Click the right

mouse button, select

Properties

, then click

Tools

, and select

Check Now

in the

Error Checking

section.

¡

For Windows 98 SE and Windows 98, run the ScanDisk utility by clicking the

Start

button, pointing to

Run

, typing

scandskw

in the dialog box,

selecting the type of test to run, and then clicking

Start

.

¡

For MS-DOS, type

scandisk x:

at an MS-DOS prompt, where

x

is the hard drive letter, and press <Enter>.

Is the drive operating properly?

Yes

. The problem is resolved.

No

. Go to

step 3

.

3.

Run the appropriate test group in the

Dell Diagnostics

:

l

For an integrated drive electronics (IDE) hard drive, run the

IDE Devices

device group.

l

For a small computer system interface (SCSI) hard drive, run the

SCSI Devices

device group.

Did any of the diagnostics tests fail?

Yes

. Go to the next question.

No

. Go to

step 4

.

Did any of the diagnostics tests indicate a faulty drive?

Yes

. The hard drive may be faulty.

Contact Dell

for technical assistance.

No

. Go to the next question.

Did any of the diagnostics tests indicate a faulty drive controller?

Yes

. The system board may be faulty.

Contact Dell

for technical assistance.

No

. Go to

step 4

.

4.

Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then

remove the computer cover

.

5.

Make sure the DC power cables from the power supply are firmly connected to the connectors on each drive. Also verify that the interface cable for each

drive is firmly connected to the drive and to the system board.

6.

Make sure the control panel cable is firmly connected to the system board. The control panel contains the hard drive activity indicator. To locate the

control panel system board connector, see "

System Board Components

."

7.

Replace the computer cover, reconnect the computer and peripherals to their electrical outlets, and turn them on.

Does the hard drive activity light blink during the boot routine?

Yes

. Go to the next question.

No

. The system board may be faulty.

Contact Dell

for technical assistance.

Does the computer display a drive error message?

Yes

. See "

System Messages

" for an explanation of the message. If you cannot correct the problem by performing the action described in the table, then

contact Dell

for technical assistance.

No

. Go to the next question.

Is this the primary hard drive that contains the operating system?

Yes

. Go to the next question.

No

.

Contact Dell

for technical assistance.

CAUTION:

Before you perform this procedure, see "

Safety First

—

For You and Your Computer

."

«
...
44
45
46
47
48
...
»

Содержание OptiPlex GX400

























































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex GX400

Бренд: VALKPC Страницы: 20

Бренд: IBM Страницы: 155

st5548 - Thin Client

Бренд: Compaq Страницы: 39

Бренд: Quanmax Страницы: 63

FPMA-MOBILE1800

Бренд: New Star Computer Products Страницы: 4

Бренд: Acorn Страницы: 114

621410U - IntelliStation E - Pro 6214

Бренд: IBM Страницы: 176

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

VGC-RA716G VAIO

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 2

VGC-LV180J - Vaio All-in-one Desktop Computer

Бренд: Sony Страницы: 2

VGC-LV170J - Vaio All-in-one Desktop Computer

Бренд: Sony Страницы: 2

VGC-LV140J - Vaio All-in-one Desktop Computer

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды