Dell Latitude XT PP12S, Руководство пользователя

Страница: 152 / 230

152
2
Remove the memory and mini-card cover. See "Removing the Memory and
Mini-card Cover" on page 150.
NOTE:
Memory modules purchased from Dell are covered under your Tablet-PC
warranty.
NOTICE:
To prevent damage to the memory module connector, do not use tools to
spread the memory-module securing clips.
3
Ground yourself by touching one of the metal connectors on the back of
the Tablet-PC.
4
Use your fingertips to carefully spread apart the securing clips on each end
of the memory module connector until the module pops up.
5
Remove the module from the connector and set aside.
Installing a Memory Module
1
Ground yourself by touching one of the metal connectors on the back of
the Tablet-PC.
NOTE:
If the memory module is not installed properly, the Tablet-PC may not boot
properly. No error message indicates this failure.
2
Align the notch in the module edge connector with the tab in the
connector slot.
3
Slide the module firmly into the slot at a 45-degree angle, and rotate the
module down until it clicks into place. If you do not feel the click, remove
the module and reinstall it.
1
2