157
2
Align the card with the connector at a 45-degree angle, and press the card
into the connector until it clicks.
NOTE:
For more specific information about which cable to connect to which
connector, see the documentation that came with your mini card.
3
Connect the cables to the mini card, ensuring that you route the cables
correctly.
4
Replace the memory and mini-card cover, and tighten the two captive
screws. See "Installing the Memory and Mini-card Cover" on page 151.
Hinge Cover
CAUTION:
Before you begin any of the procedures in this section, follow the
safety instructions in the
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the Tablet-PC).
NOTICE:
The hinge cover is fragile and can be damaged if extreme force is used.
Be careful when removing the hinge cover.
Removing the Hinge Cover
1
Follow the procedures in "Before You Begin" on page 139.
2
Turn the Tablet-PC top-side up, and then open the display all the way (180
degrees) so that the display rests on your work surface.
NOTICE:
To avoid damaging the hinge cover, do not lift the cover on both sides
simultaneously. Removing the hinge cover in a different way than described may
cause the plastic to break.
Содержание Latitude XT PP12S
