Dell Latitude XT PP12S, Руководство пользователя

Страница: 177 / 230

177
Installing the Pen and Whip Antenna Assembly
1
Seat the pen missing cable and whip antenna cable into their routing
channels.
2
Tighten the two M2 x 3-mm screws.
3
Install the system board (see "Installing the System Board" on page 173).
4
Install the palm rest (see "Installing the Palm Rest" on page 171).
5
Install the keyboard (see "Installing the Keyboard" on page 160).
6
Install the display assembly (see "Installing the Display Assembly" on
page 165).
7
Install any mini cards (see "Installing a Mini Card" on page 156).
8
Install the keyboard (see "Installing the Keyboard" on page 160).
9
Install the hinge cover (see "Installing the Hinge Cover" on page 158).
Wireless Switch
CAUTION:
Before performing the following procedures, follow the safety
instructions in your Product Information Guide .
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching a connector on the back panel of the
Tablet-PC.
NOTICE:
To avoid damaging the system board, you must remove the main battery
before you begin working inside the Tablet-PC.
Removing the Wireless Switch
1
Follow the procedures in "Before You Begin" on page 139.
2
Remove the hinge cover (see "Removing the Hinge Cover" on page 157).
3
Remove the display assembly (see "Removing the Display Assembly" on
page 162).
1 pen and whip antenna assembly 2 pen missing cable
3 M2 x 3-mm screws (2) 4 whip antenna cable
5 base