Dell Inspiron 1012 Скачать руководство пользователя страница 27

Страница: 27 / 56

13.

Remove the screw that secures the I/O board to the computer base.

14.

Lift the I/O board and ease the connectors on the I/O board out of the computer base.

Replacing the I/O Board

Follow the procedures in

Before You Begin

Align the connectors on the I/O board with the slots on the computer base.

Replace the screw that secures the I/O board to the computer base.

Connect the I/O board cable to the connector on the I/O board.

Connect the status light board cable to the connector on the I/O board and press down on the locking tab to secure the status light board cable.

Replace any installed card or blank that you removed from the 3-in-1 Media Card Reader.

Replace the speakers (see

Replacing the Speakers

Replace the left support bracket (see

Replacing the Left Support Bracket

Replace the display assembly (see

Replacing the Display Assembly

10.

Replace the hinge cover (see

Replacing the Hinge Cover

11.

Replace the palm rest assembly (see

Replacing the Palm Rest Assembly

12.

Replace the hard-drive assembly (see

Replacing the Hard-Drive Assembly

13.

Replace the keyboard (see

Replacing the Keyboard

14.

Replace the battery (see

Replacing the Battery

Back to Contents Page

I/O board

screw

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды