Dell Inspiron 1012 Скачать руководство пользователя страница 4

Страница: 4 / 56

Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.

Turn off your computer (see

Turning Off Your Computer

Disconnect all telephone or network cables from the computer.

Press and eject any installed cards from the 3-in-1 Media Card Reader.

Disconnect your computer and all attached devices from their electrical outlets.

Remove the battery (see

Removing the Battery

Turn the computer top-side up, open the display, and press the power button to ground the system board.

Back to Contents Page

CAUTION:

To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды