Dell Inspiron 1012 Скачать руководство пользователя страница 35

Страница: 35 / 56

Back to Contents Page

Wireless Mini-Card(s)

Dell™ Inspiron™ 1012 Service Manual

Removing the Mini-Card(s)

Replacing the Mini-Card(s)

If you ordered a wireless Mini-Card with your computer, the card is already installed.

Your computer supports two Mini-Card slots:

One Full Mini-Card slot

–

for WWAN

One Half Mini-Card slot

–

for WLAN

Removing the Mini-Card(s)

Follow the procedures in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the keyboard (see

Removing the Keyboard

Remove the hard-drive assembly (see

Removing the Hard-Drive Assembly

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Disconnect the antenna cables from the Mini-Card.

Remove the screw that secures the Mini-Card to the system board.

Lift the Mini-Card out of the connector on the system board.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

NOTE:

Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.

NOTE:

Depending on the configuration of the computer when it was sold, the Mini-Card slot may or may not have a Mini-Card installed.

antenna cables (2)

screw

Mini-Card

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды