Dell Inspiron 1012 Скачать руководство пользователя страница 56

Страница: 56 / 56

Insert the video accelerator card connector at a 45-degree angle into the connector on the system board.

Press the other end of the video accelerator card down into the slot on the system board and replace the processor heat sink (see

Replacing the

Processor Heat Sink

Replace the palm rest assembly (see

Replacing the Palm Rest Assembly

Replace the hard-drive assembly (see

Replacing the Hard-Drive Assembly

Replace the keyboard (see

Replacing the Keyboard

Replace the battery (see

Replacing the Battery

Install the drivers and utilities for your computer, as required. For more information, see the

Dell Technology Guide

Back to Contents Page

CAUTION:

Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.

CAUTION:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system

board, and realign the card.

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

NOTE:

If you are installing a video accelerator card from a source other than Dell, you must install the appropriate drivers and utilities. For more generic

driver information, see the

Dell Technology Guide

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды