Dell Inspiron 1012 Скачать руководство пользователя страница 47

Страница: 47 / 56

Align the slots on the left support bracket with the alignment posts on the computer base and place the bracket in position.

Replace the screw that secures the left support bracket to the computer base.

Replace the display assembly (see

Replacing the Display Assembly

Replace the hinge cover (see

Replacing the Hinge Cover

Replace the palm rest assembly (see

Replacing the Palm Rest Assembly

Replace the hard-drive assembly (see

Replacing the Hard-Drive Assembly

Replace the keyboard (see

Replacing the Keyboard

Replace the battery (see

Replacing the Battery

Removing the Right Support Bracket

Follow the procedures in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the keyboard (see

Removing the Keyboard

Remove the hard-drive assembly (see

Removing the Hard-Drive Assembly

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Remove the hinge cover (see

Removing the Hinge Cover

Remove the display assembly (see

Replacing the Display Assembly

Remove the screw that secures the right support bracket to the system board.

Lift the right support bracket off the system board.

Replacing the Right Support Bracket

Follow the procedures in

Before You Begin

Align the slots on the right support bracket with the alignment posts on the computer base and place the bracket in position.

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

screw

right support bracket

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды