Dell Inspiron 1012 Скачать руководство пользователя страница 11

Страница: 11 / 56

Back to Contents Page

Processor Heat Sink

Dell™ Inspiron™ 1012 Service Manual

Removing the Processor Heat Sink

Replacing the Processor Heat Sink

Removing the Processor Heat Sink

Follow the procedures in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the keyboard (see

Removing the Keyboard

Remove the hard-drive assembly (see

Removing the Hard-Drive Assembly

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Loosen the two captive screws that secure the processor heat sink to the system board.

Lift the processor heat sink off the system board.

Replacing the Processor Heat Sink

Follow the procedures in

Before You Begin

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

If you remove the processor heat sink from the computer when the heat sink is hot, do not touch the metal housing of the heat sink.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

NOTE:

The video accelerator card (optional) is secured by the processor heat sink screw and will pop up once you remove the processor heat sink.

processor heat sink

captive screws (2)

NOTE:

This procedure assumes that you have already removed the processor heat sink and are ready to replace it.

NOTE:

The original thermal pad can be reused if the original heat sink is reinstalled. If the heat sink is replaced, use the thermal pad provided in the kit

to ensure that thermal conductivity is achieved.

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды