Dell Inspiron 1012 Скачать руководство пользователя страница 2

Страница: 2 / 56

Back to Contents Page

Battery

Dell™ Inspiron™ 1012 Service Manual

Removing the Battery

Replacing the Battery

Removing the Battery

Follow the procedures in

Before You Begin

Turn the computer over.

Slide the battery release latches to the unlock position.

Rotate and lift the battery out of the battery bay.

Replacing the Battery

Align the tabs on the battery with the slots in the battery bay and gently press the battery until it clicks into place.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for

other Dell computers.

battery

battery release latches (2)

CAUTION:

To avoid damage to the computer, use only the battery designed for this particular Dell computer.

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды