2.
Press down the video accelerator card in the slot and place the processor heat sink on the system board.
3.
Align the two captive screws on the processor heat sink with the screw holes on the system board and tighten the two screws.
4.
Replace the palm rest assembly (see
Replacing the Palm Rest Assembly
).
5.
Replace the hard-drive assembly (see
Replacing the Hard-Drive Assembly
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Содержание Inspiron 1012
Страница 37: ...Back to Contents Page ...