Dell Inspiron 1012 Скачать руководство пользователя страница 29

Страница: 29 / 56

Release the keyboard cable connector latches and disconnect the keyboard cable from the system board connector.

Lift the keyboard off the palm rest assembly.

Replacing the Keyboard

Follow the procedures in

Before You Begin

Slide the keyboard cable into the connector on the system board and press down on the keyboard cable connector latches to secure the keyboard
cable.

Slide the tabs on the keyboard into the slots on the palm rest assembly and lower the keyboard into place.

Gently press around the edges of the keyboard to secure the keyboard under the tabs on the palm rest assembly.

Turn the computer over and replace the three screws that secure the keyboard to the computer base.

Replace the battery (see

Replacing the Battery

Back to Contents Page

keyboard tabs (4)

keyboard

1 keyboard cable

2 keyboard cable connector latches (2)

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды