Dell Inspiron 1012 Скачать руководство пользователя страница 46

Страница: 46 / 56

Back to Contents Page

Support Bracket(s)

Dell™ Inspiron™ 1012 Service Manual

Removing the Left Support Bracket

Replacing the Left Support Bracket

Removing the Right Support Bracket

Replacing the Right Support Bracket

Removing the Left Support Bracket

Follow the procedures in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the keyboard (see

Removing the Keyboard

Remove the hard-drive assembly (see

Removing the Hard-Drive Assembly

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Remove the hinge cover (see

Removing the Hinge Cover

Remove the display assembly (see

Removing the Display Assembly

Remove the screw that secures the left support bracket to the I/O board.

Lift the left support bracket off the I/O board.

Replacing the Left Support Bracket

Follow the procedures in

Before You Begin

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

left support bracket

screw

Содержание Inspiron 1012

























































Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды

Dell Inspiron 1012, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1012

Отзывы:

Похожие инструкции для Inspiron 1012

Бренды по названию

Популярные бренды