Dell H625cdw, Руководство пользователя

Страница: 99 / 399

Understanding the System Menus |
99
❚
Admin Settings > Fax Settings >
Incoming Defaults >
Receive Mode
Selects the default fax receiving mode.
❚
Admin Settings > Fax Settings > Incoming Defaults >
Ring Tone Volume
Specifies whether to enable the Ring Tone Volume setting. Set the volume of the ring
tone, which indicates that an incoming call is a telephone call through the internal
speaker when
Receive Mode
is set to
Telephone / Fax
.
❚
Admin Settings > Fax Settings >
Incoming Defaults >
Auto Receive Setup
Configures settings for automatic fax reception.
❚
Admin Settings > Fax Settings > Incoming Defaults >
Junk Fax Setup
Specifies whether to enable the Junk Fax Setup feature, which rejects unwanted faxes by
accepting faxes only from the fax numbers registered in the phone book.
❚
Admin Settings > Fax Settings >
Incoming Defaults >
Secure Receive
NOTE:
• The Secure Receive feature is available only when
Panel Lock Control
is set to
Enable
.
Telephone Automatic fax reception is turned off. You can receive a fax by picking
up the handset of the external telephone and then pressing the
remote receive code, or by tapping
Manual Receive
in
On Hook
and then tapping
Receive
.
Fax Automatically receives faxes.
Telephone / Fax When the printer receives an incoming fax, the external telephone
rings for the time specified in
Auto Receive Tel/Fax
, and then the
printer starts receiving the fax. If an incoming call is not a fax, the
printer beeps from the internal speaker indicating that the call is a
telephone call.
Ans Machine/Fax
This mode is intended for use with an answering machine. When the
answering machine receives the call, the printer monitors the call for
fax tones. When the printer detects fax tones, the printer
automatically receives the fax. When the answering machine is off,
the printer goes into the
Fax
mode after the ring tone sounds for a
predefined time. If the phone communication in your country is serial,
this mode is not supported.
DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a
separate number for faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring pattern.
Auto Receive Fax Sets the interval at which the printer goes into the fax receive mode
after receiving an incoming call.
Auto Receive Tel/Fax Sets the interval at which the printer goes into the fax receive mode
after the external telephone receives an incoming call.
Auto Receive Ans/Fax Sets the interval at which the printer goes into the fax receive mode
after the external answering machine receives an incoming call.