Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 97 / 218

Table 9 Expansion card riser specifications
PCIe slot Riser Processor
connection
Height Length Slot width
2 X16 PCIe Riser
1
Processor 1 Full height Full length x16
3 Located on
the system
board
Processor 1 Low profile Half length x16
4 Located on
the system
board
Processor 2 Low profile Half length x16
6 X16 PCIe Riser
2
Processor 2 Full height Full length x16
Expansion card installation guidelines
To ensure proper cooling and mechanical fit, the following table provides guidelines for
installing expansion cards. The expansion cards with the highest priority must be
installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Note
Do not change the default expansion card locations. The tables referenced below are
for information purposes only.
Note
The expansion-card slots are not hot-swappable.
This table shows the x16 PCIe riser 1+ x16 PCIe riser 2 configuration details.
Table 10 x16 PCIe riser 1+ x16 PCIe riser 2 configuration
Card type Card
priority Slot priority Riser
height
Maximum
number of
cards
supported Card height Card length Maximum
PCIe width
supported
GPU 100 2,6 Full height 2 Full length Full height x16
200 2,6 Full height 2 Full length Full height x16
300 2,6 Full height 2 Full length Full height x16
400 2,6 Full height 2 Full length Full height x16
500 2,6 Full height 2 Full length Full height x16
600 2,6 Full height 2 Full length Full height x16
FPGA 700 2,6 Full height 2 Half length Full height x16
800 2,6 Full height 2 Half length Full height x16
900 2,6 Full height 2 Half length Full height x16
Hardware FRU procedures
Expansion cards and expansion card risers 97