Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 96 / 218

Table 8 Remove the expansion card riser (continued)
Check
List Task Topic
☐ 9 Remove the faulty expansion card from
the riser, or the expansion card from the
faulty expansion card riser. See Remove the expansion card from the
expansion card riser on page 101.
☐ 10 Install the replacement expansion card in
the riser or the expansion card in the
replacement expansion card riser. See Install the expansion card into the
expansion card riser on page 105.
☐ 11 Install the replacement expansion card
riser or the riser containing the
replacement expansion card. See Install the expansion card risers on
page 106.
☐ 12 Install the air shroud. See the relevant topic, depending on
your system:
Install the non-GPU air shroud on page
169
Install the GPU air shroud on page 171
☐ 13 Install the system cover. See Install the system cover on page
173.
☐ 14 Slide the system into the cabinet. See Slide the system into the cabinet on
page 165.
☐ 15 Connect the I/O cables and power cords. See Connect the I/O cables and power
cords on page 164.
☐ 16 Install the bezel. See Install the front bezel on page 166.
Perform mandatory software tasks to return the node to operation:
☐
17 Return the node to operation. See "Return the node to operation" in
the VxFlex Ready Node Field Replacement
Unit Software Guide
.
Expansion cards and expansion card risers
An expansion card is an add-on card that can be installed into an expansion slot on the
system board or a slot on a riser to add enhanced functionality to the system through
the expansion bus.
Note
A System Event Log (SEL) event is logged if an expansion card riser is not supported
or missing. It does not prevent your system from turning on. However, if a F1/F2
pause occurs, an error message is displayed.
This table describes the expansion card riser specifications.
Hardware FRU procedures
96 VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual