Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 120 / 218

Che
ck
List Task Topic
☐
10 Install the replacement NIC
card.
See Install the network daughter card on page 121.
☐
11 Install the expansion card
riser.
See Install the expansion card risers on page 106.
☐
12 Install the system cover. See Install the system cover on page 173.
☐
13 Slide the system into the
cabinet.
See Slide the system into the cabinet on page 165.
☐ 14 Connect the I/O cables and
power cords.
See Connect the I/O cables and power cords on page
164.
☐ 15 Install the bezel. See Install the front bezel on page 166.
Perform mandatory software tasks to return the node to operation:
☐ 16 Verify the NIC in system
setup.
See "Network card replacement procedural checklist" in
the VxFlex Ready Node Field Replacement Unit Software
Guide
. Perform the relevant tasks, starting with "" until
you are directed back to this guide for Verify the NIC in
System Setup (BIOS)."
☐
17 Verify the new network card
in the server.
☐
18 Return the node to
operation.
Remove the network daughter card
Procedure
1. Using a Phillips #2 screwdriver, loosen the captive screws that secure the
network daughter card (NDC) to the system board.
2. Hold the NDC by the edges, and lift to disengage it from the connector on the
system board.
3. Slide the NDC towards the front of the system until the Ethernet connectors
are clear of the slot in the back of the system.
Hardware FRU procedures
120 VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual