Dell EMC VxFlex Ready Node R840, Руководство пользователя

Страница: 122 / 218

Figure 53 Installing the network daughter card
Replacing a 10G NIC in a PCIe slot
Use the following instructions to replace a 10G NIC installed in a PCIe slot.
Note
Before starting this FRU procedure, familiarize yourself with the topics in Important
information before performing a FRU procedure on page 56.
CAUTION
This FRU procedure requires you to perform mandatory software tasks in VxFlex
OS, as described in the
VxFlex Ready Node Field Replacement Unit Software Guide .
You will be referred to these mandatory software tasks in the following checklist.
Che
ck
List Task Topic
Perform mandatory software tasks to prepare the node for part replacement:
☐
1 Gather the server
information required for
performing the NDC
replacement. See "Network card replacement procedural checklist" in
the VxFlex Ready Node Field Replacement Unit Software
Guide
. Perform the relevant tasks, starting with
"Gathering server information," until you are directed
back to this guide for the actual hardware replacement.
☐ 2 Verify the NIC to replace.
☐ 3 Gracefully shut down the
node.
Return to this guide for instructions on replacing the system component:
☐
4 Remove the bezel. See Remove the front bezel on page 166.
Hardware FRU procedures
122 VxFlex Ready Node R840 Hardware Field Replacement Unit and Service Manual