1.
Double-click the
Unified Driver Configurator
.
2.
Click
Add Printer…
3.
The
Add printer wizard
window opens. Click
Next
.
4.
Select
Network printer
and click the
Search
button.
5.
The printer’s IP address and model name appears on list field.
6.
Select your machine and click
Next
.
7.
Input the printer description and
Next
8.
When the add printer is done, click
Finish
.
IPv6 Configuration
TCP/IPv6
is supported properly only in Windows Vista or higher.
If the IPv6 network seems not working, set all the network setting to the factory defaults and try again. (See
Restoring factory default settings
.)
To use the IPv6 network environment, follow the next procedure to use the IPv6 address:
The machine is provided with IPv6 feature on.
1.
Connect your machine to the network with a network cable.
2.
Turned on the machine.
3.
Print a
Network Configuration Report
from the machine’s control panel that will check IPv6 addresses.
4.
Select
Start
>
Control Panel
>
Hardware and Sound
>
Printers
>
Add Printer
.
5.
Click
Add a local printer
on the
Add Printer
windows.
6.
Follow the instruction on the window.
If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by.
Printing network configuration report
You can print a
Network Configuration Report
from the machine's control panel that will show the current machine’s
network settings. This will help you to set up a network and troubleshooting problems.
To print the report:
In ready mode, press and hold the (cancel button) for about 5 seconds. You can find your machine’s MAC address
and IP address.
For example:
MAC Address : 00:15:99:41:A2:78
IP Address : 192.0.0.192
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and managements.
Link-local Address
: Self-configured local IPv6 address. (Address starts with FE80.)
Stateless Address
: Automatically configured IPv6 address by a network router.
Stateful Address
: IPv6 address configured by a DHCPv6 server.
Manual Address
: Manually configured IPv6 address by a user.
Manual address configuration
1.
Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL. (See
Using Embedded Web
Service (Dell 1130n only)
.)
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click
Go
.
2.
When the Embedded Web Service window opens, click
Network Settings
.
3.
Click
TCP/IP
.
4.
Enable the
Manual Address
In the
TCP/IPv6
section.
5.
Select the
Router Prefix
and click the
Add
button, then the router prefix will automatically be entered into the
address field.
