If you do not see your printer on the list, click
Update
to refresh the list, or select
Add TCP/IP Port
to add
your printer to the network. To add the printer to the network, enter the port name and the IP address for the
printer.
To verify your printer’s IP address, print a Network Configuration page. (By pressing the (cancel button) for
about 5 seconds, then release. (Example IP Address is 13.121.52.104)
To find a shared network printer (UNC Path), select
Shared Printer [UNC
] and enter the shared name manually
or find a shared printer by clicking the
Browse
button.
If you cannot find your machine in network, please turn off the firewall and click
Update
.
For Windows operating system,
Start
>
Control Panel
and start windows firewall, and deactivate this option.
For other operating system, refer to its on-line guide.
6.
After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page,
select the checkbox and click
Next
. Otherwise, just click
Next
and skip to step 8.
7.
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
8.
Click
Finish
.
After the driver setup, you may enable firewall.
If the printer driver does not work properly, follow the steps below to repair or reinstall the driver.
1.
Make sure that the machine is connected to your machine and powered on.
2.
From the
Start
menu, select
Programs
or
All Programs
>
Dell
>
Dell Printers
>
your printer driver
name
>
Maintenance
.
3.
Select the option as you wish, follow the instruction on the window.
Macintosh
1.
Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should
have been set.
2.
Insert the supplied software CD into your CD/DVD drive.
3.
Double-click the CD-ROM icon that appears on your Macintosh desktop.
4.
Double-click the
MAC_Installer
folder.
5.
Double-click the
Installer OS X
icon.
6.
Enter the password and click
OK
.
7.
The
Dell Installer
window opens. Click
Continue
.
8.
Select
Easy Install
and click
Install
.
Easy Install
is recommended for most users. All components necessary for
machine operations will be installed.
If you select
Custom Install
, you can choose individual components to install.
9.
The message which warns that all applications will close on your computer appears. Click
Continue
.