Davin J012, Руководство по обслуживанию

Страница: 143 / 365

[  ] or [  ] > To display an item.
[Yes]> Select the item and go to the next level down in the menu.
[No]> To return to the previous menu level. (Press repeatedly to return to standby.)
[Clear Modes]> Press once to return immediately to standby.
Menu/Menu Item Function
System Settings?
This menu includes important basic settings that affect operation of the machine.
1 Auto Reset Time? Allows the machine to reset a job setting to its original values if the
user pauses too long while setting up a job.
[0.5 to 1/0/1 min.]
0: OFF
Press [
 ] or [  ] to select how long the machine waits before it
restores the original settings. These settings are available: 0.5, 1, 2,
3, 4, 5 min.
2 Energ. Saver Timer? Switches the energy save function on/off. The default setting is off (15
min.)
[1 to 240/15/ 1 min.]
When this function is on, the machine will automatically shut down
some of its functions after it remains idle for the prescribed amount of
time.
Note:
• The machine will require some time to recover after it receives a
print job while in the energy saver mode.
• The machine might not enter the energy save mode while an error
message is displayed.
3 Auto Off Timer? The machine is set to return to the standby mode from the menu mode
if a key is not pressed within 60 sec. This ensures that the machine is
always ready for operation.
Default: OFF (ON = 60 min.)
Notes
• If this item is switched off, the machine will not reset automatically
to standby mode. This can be convenient when doing long setup
or testing procedures during installation and troubleshooting.
4. Troubleshooting
142
4