Davin J012, Руководство по обслуживанию

Страница: 252 / 365

8. Adjust the gap (High Quality).
9. Print the print head gap adjustment chart (High Quality).
10. Print the Nozzle Check test pattern.
5200 PRINT SMC Print an Engine Maintenance Summary
Use this SP to print an engine maintenance summary. You need at least 8 sheets of paper to do
this print. It will take at least 3 minutes before the print will start.
5300 DUMMY NUMBER Set a Dummy Number
Use this SP to set the dummy number.
5301 ENGINE SW1 Engine Switch 1
Bit Setting
0 Controls the operation of the suction cap on the maintenance unit.
Never change this setting.
1: On (default)
0: Off
1 Switches drive cleaning control on and off.
1: Executes drive cleaning. Automatically resets to "0" (off) after drive cleaning is finished.
Do this type of cleaning only after print head cleaning and print head flushing have failed
to recover operation of the machine.
2 This SP shows the cleaning execution flag after flushing the printer heads.
Never change this setting.
1: Cleaning
0: No cleaning (default)
3 Controls operation of the ink supply pumps.
[0 to 1/1/1]
1: Disables operation of ink supply pumps after long period of storage.
0: Allows pumps to operate after long period of storage.
4 Never change these settings.
5
6
7
SP Mode Service Tables
251
5