Davin J012, Руководство по обслуживанию

Страница: 195 / 365

Item Path
3. [Yes]> "Paper Type?"> [Yes]> "Plain Paper?"
4. [
 ] or [  ] > Select the type of paper that will be loaded in
Tray 1
5. [Yes]> "Tray Paper Setting?"> [Yes] "Tray1?"> [Yes]> "Paper
Type?"
6. [  ] or [  ] > "Paper Size?> [Yes]
7. [

] or [

] > Select the size of paper that will be loaded in Tray
1
8. [Yes]> "Tray Paper Setting?"
Power Off [Power] Power LED flashes then extinguishes
Power On [Power] Power LED flashes until warm-up finishes, then lights and
remains on.
Print Head Position 1. [Menu]> "System Settings?"
2. [
 ] or [  ] > "Maintenance?" > [Yes]> "1 Nozzle Check?"
3. [  ] or [  ] > "4 Head Position?"
4. For more see "Head Position" in "4. Troubleshooting".
Print Head: Washing (Before
Long Storage) 1. Enter the SP mode
2. Select SP5007 and switch it on.
3. Open the right front door.
4. Remove the print cartridges and replace them with the cleaning
cartridges.
5. Close the right front door.
6. Confirm that "WASHING" and "EXEC" are displayed, then push
[Yes].
7. When you see "OK?" push [Yes].
8. "RUNNING" displays while the cleaning sequence executes.
• For more see "Cleaning the Print Heads Before Long Term
Storage" in "4. Troubleshooting".
Print Head: Cleaning (Drive
Cleaning) This is the third and last procedure you should do to clean the print
heads if normal print head cleaning and flushing fail to correct the
problem. There are two ways the set the machine for drive cleaning
in the SP mode. (The first method requires fewer steps.)
Method 1
4. Troubleshooting
194
4