Davin J012, Руководство по обслуживанию

Страница: 35 / 365

To print the Config. Page (System Summary)
1. [Menu]> "System Settings"
2. [

] or [

] > "Engine Settings?"> [Yes]
3. [  ] or [  ] > "2 List/Test Print?"> [Yes]> "Configuration Page?"
4. [Yes]> "Please Wait" displays as the report prints.
To print a Nozzle Check Pattern
1. [Menu]> "System Settings"
2. [
 ] or [  ] > "Maintenance" > [Yes]> "Nozzle Check?"
3. [Yes]> "*Please Wait*" displays as the pattern prints.
4. [

] or [

] > "Nozzle Check" > [Yes]. The Nozzle Check pattern prints.
5. [Clear Modes] to return to the initial screen.
• For more about how to use the Nozzle Check pattern to diagnose and correct problems, see
Section 4 “Troubleshooting".
To clean the print heads
• Before cleaning the print heads always do a Nozzle Check to determine which color is not printing.
The print heads should be cleaned only if a problem exists.
To clean the print heads:
Do print head cleaning at least three times before you do head-flushing. Print a Nozzle Check to check
the results of each cleaning.
1. Pull the release under the operation panel forward and raise the scanner unit.
2. Confirm that the envelope selector is forward.
3. [Menu]> "System Settings?"
4. [

] or [

] > "Maintenance" > [Yes]> "1 Nozzle Check?"
5. [  ] or [  ] > "2 Head-cleaning>" > [Yes]> "All Heads"
6. [  ] or [  ] > Select the print heads to be cleaned: "All" (all print heads), "Print-head 1" (Black/Cyan),
"Print-head 2" (Magenta/Yellow") > [Yes]
"*Please Wait*" displays until cleaning is finished. Do not start any other operation until cleaning
stops.
7. [Clear Modes]
1. Installation
34
1