Davin J012, Руководство по обслуживанию

Страница: 55 / 365

4. Push the multi-bypass tray into the back of the machine as shown unit it clicks.
5. Pull out the extension of the multi-bypass tray.
6. Load paper in the tray with the print side facing up.
• Never remove the duplex unit from the back of the machine.
• The duplex unit is part of the paper feed path and must be installed, even if the customer is not
doing duplex printing.
Set Paper Type and Size for the Multi Bypass Tray
Do the Paper Type/Size Setting for the Multi Bypass Tray
1. [Menu] > "System Settings?"
2. [
 ] or [  ] > "Tray Paper Setting?"> [Yes]> "Tray1?"
3. [

] or [

] > "Bypass Tray"
4. [Yes] > "Paper Type?"> [Yes]> "Plain Paper?"
5. [
 ] or [  ] > Select the type of paper that will be loaded the Multi Bypass Tray.
6. [Yes] > "Tray Paper Setting?"> [Yes] "Tray1?"
7. [

] or [

] > "Bypass Tray"
8. [  ] or [  ] > "Paper Size?> [Yes]
9. [  ] or [  ] > Select the size of paper that will be loaded in the Multi Bypass Tray.
10. [Yes] > "Tray Paper Setting?"
11. [Clear Modes]> Standby
12. Cycle the machine off/on.
1. Installation
54
1