Davin J012, Руководство по обслуживанию

Страница: 162 / 365

Let one hour pass for the printer to adjust to room temperature before you use it after moving to a new
location. This is very important after the printer is moved from a cold location into a warm room.
SC Code Tables
Print the System Summary (Config. Page) to see the 5 most recent SC codes.
1. [Menu]> "System Settings?"
2. [
 ] or [  ] > "Engine Settings?"> [Yes]
3. [

] or [

] > "2 List/Test Print?"> [Yes]> "Configuration Page?"
4. [Yes]> "Please Wait" displays as the report prints.
S001 Home Position Error
Scanning element did not move to the home
position after power on and initialization of
the CCD unit. • Original path is blocked
• Scanner unit not closed and locked
• Cycle the machine off/on
• Scanner motor defective
• Scanner motor defective
S002 USB Communication Error
There was a communication error between
the main board and the CTL board. • USB connector loose or
disconnected
• Cycle the machine off/on
• Scanner unit CTL board defective
• Emgine unit CTL board defective
S003 Exposure Lamp Error
At the beginning of the scanning job the
correct data could not be read from the
CCD. • Scanner unit not closed and locked
• Cycle the machine off/on
• Exposure lamp defective
• CCD board defective (replace
scanner unit)
950 USB Chip ID Detection Error
At power on there was a power surge
caused by unstable power supply. • CTL board defective
SC Error Codes
161
4