Davin J012, Руководство по обслуживанию

Страница: 234 / 365

For Future Use. Use this SP code to adjust writing in the sub scan registration for glossy paper.
Do this setting when it is necessary to fine adjust the line feed position.
[-128 to +127/FA/1/0.1 mm]
1013 REG:FD2:OHP:F Adjust Sub Scan Registration (OHP: 2nd Registration: FA)
For Future Use. Use this SP code to adjust writing in the sub scan direction for transparencies
(OHP). Do this setting when it is necessary to fine adjust the line feed position.
[-128 to +127/FA/1/0.1 mm]
Paper Feed
1014 FDLEN:F Adjust Amount of Paper Feed (FA)
Do this SP adjust the amount of line feed for 1 scan line. Do this setting only if the line feed amount
cannot be adjusted on the user menu of the printer operation panel with "Adj. Paper Feed".
[-1000000 to +1000000/FA/1
μ
m]
1015 FDLEN:OFFSET Adjust Amount of LF Offset in Sub Scan Direction
Use this SP to set the amount of line feed before the print head begins its 2nd pass during bi-
directional printing. Do this SP when it is necessary to correct color offset that occurs during bi-
directional printing.
[-128 to +128/FA/1/Vertical Encoded Pulse Count]
Carriage
1016 ADJ:SIDEBOARD Adjust Sideboard (Carriage Home Position)
Use this SP to set the reference position for installation of the right plate. Do this SP to correct
the alignment of the capping position with the carriage.
[-128 to +128/FA/1/0.1 mm]
Suction Vents
1017 PRGPOS:R Adjust Position of Right Suction Vent DFU
Use this SP to adjust the venting position of the right air vent. Do this SP after it has been
determined that the ink is not venting at the center of the right ink suction vent.
SP Mode Service Tables
233
5