Davin J012, Руководство по обслуживанию

Страница: 197 / 365

Item Path
2. Confirm that the envelope selector is forward.
3. [Menu]> "System Settings?"
4. [

] or [

] > "Maintenance" > [Yes]> "1 Nozzle Check?"
5. [  ] or [  ] > "2 Head-cleaning>" > [Yes]> "All Heads"
6. [  ] or [  ] > Select the print heads to be cleaned: "All" (all print
heads), "Print-head 1" (Black/Cyan), "Print-head
2" (Magenta/Yellow") > [Yes]
7. For more see "Print Head Cleaning" in "4. Troubleshooting".
Registration 1. [Menu]> "System Settings?"
2. [
 ] or [  ] > "Maintenance?" > [Yes]> "1 Nozzle Check?"
3. [  ] or [  ] > "6 Registration" > [Yes].
4. For more see "Registration" in "4. Troubleshooting".
Reset System 1. [Clear Modes]> [107]> [Clear/Stop]> "Service Menu"> [Yes]
> "Bit Switch"
2. [

] or [

] > "Reset Settings"> [Yes]> "Initialize Sys."> [Yes]>
"Press Yes Key"> [Yes]
SMC Report See "Engine Summary Chart" above.
SP Mode (Entering) 1. [Clear Mode]> [107]
2. [Clear/Stop]> Hold 3 sec. and release> "Service Menu"
SP Mode – Changing SP Codes 1. [Clear Mode]> [107]
2. [Clear/Stop]> Hold 3 sec. and release> "Service" menu"
3. [
 ] or [  ] > "Engine Maint."> [Yes]
4. For more about changing SP codes, see "Using SP Mode
Menus" in "5. Service Tables2.
Scanning Test 1. [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
2. [
 ] or [  ] > "6. FUNCTION"> [Yes]> "ADF FEED TEST"
3. [

] or [

] > "SCAN TEST"> "[Yes]> "SCAN TEST/
SCAN=START"
4. [B&W Start] to start the test
5. [Clear/Stop] to stop the test
Service Mode Entry [Menu]> [#]> [*]> [Yes]> "1. SERVICE'S CHOICE"
4. Troubleshooting
196
4