Davin J012, Руководство по обслуживанию

Страница: 178 / 365

Code Possible Cause
00CE TX unit send EOM at Phase D but received DCN.
00CF Incorrect signal received after sending DTC signal for V.34 polling.
00D0 Received ERR signal after sending EOR_NULL.
00D1 Received incorrect response after sending PPS_EOP signal in V.34.
00D2 Received DCN after sending PPS_EOP signal.
00D3 Received DCN after sending PPS_NULL signal.
00D4 Received DCN after sending PPS_EOM signal.
00D8 No correct phase 3 signal detected for polling within 25 sec.
00D9 No correct phase 3 signal detected when silence detected after phase 2.
00DA No Phase 4 signal detected within 30 sec. or remote machine hung up longer than 6 sec.
00DB Cannot received any T.30 signal within 15 seconds within phase 4.
00DC T.30 signal received in Phase 4 was signal other than DCS, DIS or DTC.
00DD Remote machine is not the same model, or no mailbox ID defined for mailbox TX.
00DE Remote machine has no SUB capability in V34.
00E0 TX unit sent PPS_NULL 3 times at Phase D but received no answer.
00E1 Received incorrect response after sending PPS_NULL.
00E2 No response received during RR response procedure after PPS_NULL was sent.
00E4 TX unit sent PPS_MPS 3 times at Phase DTX but received no answer.
00E5 Received incorrect response after sending PPS_MPS.
00E6 No response received during RR response procedure after PPS_MPS was sent.
00E7 Received DCN after sending PPS_MPS.
00E8 TX sent PPS_EOP 3 times at Phase D but received no answer.
00E9 PIN signal received after last page was sent three times.
00EA No RX response received during RR response procedure after PPS_EOP was sent.
00EB TX unit sent PPS_EOM 3 times at Phase D but received no answer.
SC Error Codes
177
4