Davin J012, Руководство по обслуживанию

Страница: 107 / 365

If the control board is being replaced…
1. Pull the NVRAM from the control board removed from the printer.
2. Install the NVRAM on the new control board.
3. Attach the new NVRAM so the curvature of the white line on the board
¬
matches the curvature of
the indentation on the NVRAM chip.
The table below lists the counters and other items that are cleared as a result of replacing the controller
board with a new controller board and new NVRAM, or replacing only the NVRAM. Some items require
manual resetting, and others do not require resetting.
Item SP/UP Reset Procedure
User Menu
- Paper Size
- System Setting
- I/F Setting All User Menu
Items Print a System Summary. Confer with the operator to
determine how to do the settings.
Bit Switches --- Print a Service Summary. See "5. Service Tables".
Settings Clear --- Initial System Settings/Counter Settings
Plug-and-Play --- Print a Service Summary. Confirm that the printer
model numbers are correct, reset if necessary.
Counter Display Settings --- Print a Service Summary and reset.
FAX number setting --- Consult operator and reset
3. Replacement and Adjustment
106
3