Datavideo VGB-2000, Инструкция по эксплуатации

Страница: 9 / 84

9
SWITCHER HDMI
IN(CAM 1) &
SWITCHER HDMI
IN(CAM 2)
（
from the
left side to the right
side
）
These SWITCHER HDMI IN (CAM1) and
SWITCHER HDMI IN (CAM2) allow users to
input Logo or powerpoint slide from an
external connected laptop by an HDMI cable.
The SWITCHER HDMI IN (CAM 1) which is
located on the right side allows users to
input their desired Logo.
The SWITCHER HDMI IN (CAM2) which is
located on the left side allows users to input
their desired powerpoint slide.
fo
AUDIO IN RCA(R) /
AUDIO IN RCA(L)
This is the RCA unbalanced audio signal input
for users to input the unbalanced stereo
analog audio for streaming and recording.
MIC IN This is the balanced XLR microphone input
interface.
GPI Port Please connect the FS-220 foot switch to this
GPI port for transmitting the Tally signal to
the LBK-1 and for switching between the
Record and Pause modes of the HDR-70.
Note: Before using the VGB-2000, please
make sure that the HDD must be inserted
into the HDR-70 and the Record mode
button for the HDR-70 must be initiated. For
more details, please refer to the HDR-70
user manual.
SWITCHER LAN IN This SWITCHER LAN IN interface allows users
to connect the VGB-200 and the laptop
which is used to install the SE-1200MU
control software. After the laptop is set
within the same IP range of the SE-1200MU,
users can control and set the SE-1200MU by
using the software control interface.