Datavideo VGB-2000, Инструкция по эксплуатации

Страница: 57 / 84

57
Once selected, click OK to start the scanning process.
If the SE-1200 MU control software cannot find the SE-1200 MU device, the software will continuously
prompt you for an appropriate interface card. Again, please make sure the selected interface card is
on the same network domain as the SE-1200 MU device.
Once the SE-1200 MU device is found, the software will connect with the switcher hardware over the
IP set up described on the previous page.
As the software opens, you should be able to see the interface shown below. As the program buttons
are clicked the SE-1200 MU program output and multi view output will show changes.