Datavideo VGB-2000, Инструкция по эксплуатации

Страница: 16 / 84

16
BITRATE Button
Switch the stream/record bitrate mode using the
BITRATE button; follow the steps outlined below:

Press and hold one of the STREAM
button, the RECORD button and the STREAM
button until the pressed button starts blinking
red.

Continue holding down one of the
STREAM button, the RECORD button,
and the STREAM button while pressing the
BITRATE button to switch bitrate mode (H, M or
L).
Note: The system will return to the previous
setting if the BITRATE button push is not sensed.
The default bitrate is M.
H/M/L LED Indicators
ON (Green): Bitrate mode enabled
OFF: Bitrate mode disabled
STREA
M Button The STREAM button activates and
deactivates simultaneous recording and streaming;
follow the steps outlined below:
Start recording/streaming simultaneously

When idle, the STREAM button is solid
white.

Press and hold the STREAM button for
approximately 2 seconds (Note: the previously
activated mode will be disabled).

When the record and stream functions are
activating simultaneously, the
STREAM button turns from solid
white, then blinking red and finally to solid red.

When the STREAM button turns solid
red, this indicates that the record and stream
functions have been successfully activated.
Stop recording/streaming simultaneously

While recording and streaming simultaneously,
the STREAM button is solid red.

Press and hold the STREAM button for