Datavideo VGB-2000, Инструкция по эксплуатации

Страница: 55 / 84

55
6
Teacher’s Half-Body
（
SDI 1 foreground
）
+Virtual
Background
（
SDI 4
）
Note
：
Key 1 of the SE-1200 must be set as Chroma Key.
Full-Body
7
Teacher’s Full-Body
（
SDI 2 foreground
）
+Virtual
Background
（
SDI 3
）
Note
：
Key 1 of the SE-1200 must be set as Chroma Key.
8
Teacher’s Full-Body
（
SDI 2 foreground
）
+Powerpoint
Slide
（
SWITCHER HDMI IN(CAM2)P-in-P
）
+Virtual
Background
（
SDI 3
）
Note
：
Key 1 of the SE-1200 must be set as Chroma Key,
Key 2 must be set as Luma Key + PIP Key.
Teacher’s Full-Body Virtual
Back Powerpoint Slide.
10.2 Network Setup for the VGB-2000 Built-in SE-1200 MU
10.2.1 Network Setup Way
Before using the SE-1200 MU, it is a must for users to do the network setup. Please follow following
steps for connecting the Ethernet cable and for setting the Network related settings.
The SE-1200 MU switcher is not supplied with a traditional hardware based control panel. Instead it is
controlled using a software user interface installed on your Windows-based computer. When new
from the factory the unit will initially have a static IP address of 192.168.100.101 by default. The
unit can be directly connected to a Windows-based computer using an RJ-45 ethernet cable. The
following set up should allow you to initially configure the unit before moving it to an existing DHCP /
LAN network.

An RJ-45 Ethernet cable

Windows 7/8/10 laptop or PC

The Datavideo SE-1200 MU controller
software