Datavideo VGB-2000, Инструкция по эксплуатации

Страница: 68 / 84

68
Step 1. Step 1. Please refer to chapter 8 to assign the pre-saved virtual background image to the SDI 3
input interface of the SE-1200MU.
Step 2. Please open the SE-1200 control interface and then please select the “Key 1” button from the
“AUX BUSES” panel.
Step 3. Please select the “Chroma” button from the “KEYERS CONTROLS” panel.
Step 4. Please select the “2” button from the “AUX BUS” button row which is located on the
“SOURCES” panel (Because the full-body screen is shot by the CAMERA2 interface).
Step 5. Please press the “Setup” button which is located on the “MENU SELECT” panel for entering
the Chromakey detailed setting interface.
Step 6. Please select the “2” button from the “PROGRAM” button row which is located on the
“SOURCES” panel for setting the detailed Chromakey settings for the source of the CAMERA2
interface.
Step 7. At first, please select the “Key 2” button from the “AUX BUSES” panel. After that, please select
the “Luma + PIP” buttons which are located on the “KEYER CONTROLS” panel.
Step 8. Please select the “6” button from the “AUX BUS” button row which is located on the
“SOURCES” panel (Because the Powerpoint slide screen is provided by the HDMI IN (CAM2) interface).
Step 9. Please press the “Setup” button which is located on the “MENU SELECT” panel for entering the
detailed setting interface of the Lumakey.
Step 10. Please tap the “Save” button from the USER/SHOTBOX keyboard and then there is a pop-up
numeric keypad that will be shown for users to enter their desired User default number. After that,
please press the “Enter” button and then the current setting can be saved successfully. If users want
to apply the “User 8” settings, please press the “User 8” button directly for applying the User 8
settings. (Teacher’s Full-Body Shot + Virtual Back Powerpoint Slide).