Datalogic Accu-Sort AccuVision AV6010 Скачать руководство пользователя страница 79

Страница: 79 / 245

AccuVision

AV6010 Long-Range Camera System Manual

Chapter 5

05-AV6010_Setup_R10.doc

Accu-Sort Systems, Inc.

RangeFinder Mounting

Use the RangeFinder Mounting window to make adjustments the orientation,

mounting position and front/back box tracking extensions.

NOTE:

It is recommended that the

AV6010 Install Wizard

be used to set

these parameters the first time. Through a series of setup wizards, you

can ‘teach’ the system key parameters which results in auto calibration.

The RangeFinder Mounting window can be used to adjust the dimensions

as necessary to improve system performance.

Prerequisites:

The

AV6010 Install Wizard

should be downloaded and installed on your

computer.

Use the

RangeFinder Wizard

to auto-calibrate these configuration

settings

To set the RangeFinder Mounting configuration:

1. Select

Setup > Mounting > RangeFinder

from the menu tree. Select

the camera position that you want to configure (e.g., front, top, back,

etc.). The window for the selected camera position is displayed.

2. Enter the

Mounting Angles

(roll, pitch and yaw).

3. Enter the

Mounting Position

(along belt, across belt and height).

4. Enter the

RangeFinder Ignore Limits

(left and right).

5. Enter the

RangeFinder Settings

as required by the application.

6. Click

Update

to save any changes.

7. Click

Reset

to return all parameters to the last values saved.

See also: Setup > Mounting > RangeFinder in Appendix B.

Содержание Accu-Sort AccuVision AV6010






















































































































































































































































Результаты поиска

Содержание Accu-Sort AccuVision AV6010

Отзывы:

Datalogic Accu-Sort AccuVision AV6010, Системное руководство, Страница: 79 / 245

Результаты поиска

Содержание Accu-Sort AccuVision AV6010

Отзывы: