Datalogic Accu-Sort AccuVision AV6010 Скачать руководство пользователя страница 68

Страница: 68 / 245

Setup

AccuVision

AV6010 Long-Range Camera System Manual

Accu-Sort Systems, Inc.

05-AV6010_Setup_R10.doc

To align a mirror for Front, Top or Back applications:

1. Confirm mirror is properly mounted to the mirror sled

(as shown)

The flanged edge of the mirror mounting brackets should face the

camera and the mirror angle will be almost parallel with the flange.

2. Confirm the mirror assembly is mounted in the correct position on the

mounting structure. (Mirror positions are pre-marked on the mounting

structure. You can also check these positions on any mounting structure

drawings provided with your system.)

3. Use the proper mirror alignment tool to set the mirror position.

4. Tighten the mirror mounting screws that fix the mirror position in place.

5. After tightening the hardware, re-check the mirror angle with the

alignment tool.

6. Remove the protective film from the mirror surface before attempting

calibration.

Mirror Alignment for Front, Top and Back Cameras

IMPORTANT:

Mirrors for front, top and back read applications must be

aligned parallel with the flanged edge of the mounting bracket using the

inside edge of the alignment tool. Mark the bracket and write down the

angle in case the mirror ever needs to be replaced.

Adjust mirror

angle until the

mirror is flush

with the

alignment tool.

Flanged edge of

bracket must

face the camera.

Содержание Accu-Sort AccuVision AV6010






















































































































































































































































Результаты поиска

Содержание Accu-Sort AccuVision AV6010

Отзывы:

Datalogic Accu-Sort AccuVision AV6010, Системное руководство, Страница: 68 / 245

Результаты поиска

Содержание Accu-Sort AccuVision AV6010

Отзывы: