![background image](http://html.mh-extra.com/html/datacard/sr200/sr200_user-manual_511393013.webp)
SR200 & SR300 Printer User Guide
9
Remove Hopper and Cards
The card hopper can be removed from the printer for secure storage, to set
card thickness, or for cleaning.
1
Slide the card hopper latch
closed (1).
2
Lift the hopper up (2). The
hopper cover and hopper are
locked together and both are
removed.
Replace the Hopper
1
Insert the hooks on the card hopper
into the slots in the receptacle.
2
Slide the card hopper down until it
clicks into place.
Adjust Card Thickness
From the factory, the printer is set to use cards 0.030 in (0.75mm) thick.
Follow these steps to set the printer to use cards of a different thickness.
1
Remove the card hopper, as described
above.
2
Turn the hopper so the silver dial faces
you.
3
Use a pointed item such as a pen.
Slide the dial:
— Slide the dial counterclockwise
(CCW) to print thinner cards.
— Slide the dial clockwise (CW) to
print thicker cards.
•
A setting of 1.0mm corresponds to cards 0.040in thick.
•
A setting of 0.75mm corresponds to cards that are 0.030in thick.
•
A setting of 0.5mm corresponds to cards that are 0.020in thick.
•
A setting of 0.25mm corresponds to card that are 0.010in thick.
4
Replace the Card Hopper, as described above.
5
Set the card thickness on the Status Monitor. See
“Media Setting tab”
on page 32
.
6
Test the new setting with several cards to make sure the printer picks
only one card at a time.
Содержание SR200
