![background image](http://html.mh-extra.com/html/datacard/sr200/sr200_user-manual_511393033.webp)
SR200 & SR300 Printer User Guide
29
•
If the printer is processing a job, the name of the document and the name of the
user appears in the Document Information area.
•
When the printer requires cleaning, the printer image changes to:
•
The current state of the printer, such as ready. The icon changes
with different states. See the table below.
Icon
Status
Icon Color
Meaning
No Printer is found.
Yellow
The printer power is not switched on. or the host PC and
printer are not connected correctly.
Ready
Green
The printer is ready and able to start card printing.
Initializing
Yellow
The printer is initializing. After the printer is initialized, it
goes into Ready state.
Offline Mode
Yellow
The printer is in Setting mode or it is being cleaned.
When the process ends, it goes into Ready state.
Preheating
Yellow
The heat roller is heating. When it reaches the correct
temperature, the printer goes into Ready state.
Heating
Yellow
The printer is adjusting the heat roller temperature.
Card Loading
Card Transporting
Contact IC Encoding
Non-Contact IC
Encoding
MG Encoding
Printing
Retransfer
Yellow
The printer is issuing cards. The operating status during
card issuing is indicated. When the card is issued, the
printer goes into Ready state.
Power Saving
Yellow
The printer is in power save mode. To end Power
Saving, press the Reset key on the printer and then
press the Enter key to initialize the printer.
Error
Red
See
“Status monitor messages” on page 35
.
Содержание SR200
